Search
Generic filters
Raimondi Milling Wheel for Bulldog Continues rim – Step 1
$410.00

Raimondi Diamond Milling Wheel for Bulldog Machine Continues Rim – Step 1 All wheels are tested and balanced to give the best profiling results with our Raimondi Bulldog machines. BDW38S1FC Step 1 Milling Wheel – Continues Rim Milling wheel segmented radius – 3/8″ (10mm) Diameter – 4 3/4″ (120 mm) Arbor size – 25/32″ (20 mm) Grit – 80 BDW58S1FC Step 1 Milling Wheel – Continues Rim Milling wheel segmented radius – 5/8″ (15mm) Diameter – 5″ (125 mm) Arbor size – 25/32″ (20 mm) Grit – 80 STEPS Step 1: uses the Segmented milling wheel to rough out the shape. Step 2: Rough finish wheel of approximately Step 3: Use yellow wheel for honed finish. Step 4: Use red wheel for satin finish. Step 5: Use grey wheel for glossy finish. Fits on both Bulldog machines (BD1WD and BD2WD) and back-finishers (BDSABF and BDCBF) Raimondi Bulldog 3/8-inch Radius 80 Grit Milling Wheel is STEP 1 in making your bullnose piece. The New Continuous Rim 3/8-inch radius Milling Wheel is 80 grit to start the removal of heavy stock from your tile or stone to give the piece it’s 3/8-inch radius Rough Shape 45??ANGLE – A 45?? angle can be achieved with the milling wheel and rough finish wheel. The two 45?? wheels available can be used on all Bulldog machines, this includes the back-finishers. BULLNOSE – Bullnose can be attained with the milling wheel, and rough finish wheel. These wheels come both in sizes 3/8″ and 5/8″ Click here for Raimondi Buldog ADV Accessories

Copyright © 2022 AMAST. All rights reserved.

Submit you post here.

Please be patient after posting, because your article must be reviewd by one of our editors.
Thank you!

Please complete the required fields.
Please select your image(s) to upload.

New Account

Please complete the details below and we'll be in contact as soon as possible.